System requirements

  The AXS-CR1 Utility Software has been tested under the following operating conditions.

- Operating system

 Microsoft Windows Vista Buisiness 64-bit version, Service Pack 2 or later
 Microsoft Windows Vista Ultimate 64-bit version, Service Pack 2 or later
 Microsoft Windows 7 Professional 64-bit version, Service Pack 1 or later
 Microsoft Windows 7 Ultimate 64-bit version, Service Pack 1 or later
 Microsoft Windows 8 Pro 64bit version,

- Memory
� 4GB or more
�

- Free hard disk space
� 100MB or more
�

- USB
    Hi-Speed USB� (USB 2.0�)
 A Hi-Speed USB� (USB 2.0), host controller is required to connect a PC to AXS-CR1.
    SuperSpeed USB� (USB 3.0)
 A SuperSpeed USB� (USB 3.0), host controller is required to connect a PC to AXS-CR1.

Please review the ReadMe(E)_v1_10.txt file included in the zip packge before installing the Utility pgm.

Requirements:
 
OS:  Microsoft Windows XP Professional Service Pack 3 or later
 Microsoft Windows Vista Business 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows Vista Ultimate 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows 7 Professional 32-bit/64-bit version, Service Pack 1 or later
 Microsoft Windows 7 Ultimate 32-bit/64-bit version, Service Pack 1 or later
 Microsoft Windows 8 Pro 32-bit/64-bit version
 
Processor: Intel Core 2 Duo 3.0 GHz or higher, or Intel Xeon 3.0 GHz or higher
 
Memory: 2GB or more (4GB when using TL-RE or QL-WO discs)
 
USB: Hi-Speed USB (USB 2.0):
   Hi-Speed USB (USB 2.0) host controller required.
        SuperSpeed USB (USB 3.0): (PDW-U2 only)
   SuperSpeed USB (USB 3.0) host controller required.
         
New XDCAM drive firmware is included and the PDWU1/U2 drives should be updated using the Utility program.
Please see ReadMe file before installing.

Content Browser Version 1.1
 
Content Browser is a successor to XDCAM Browser. 
When you upgrade XDCAM Browser to Content Browser, XDCAM Browser is uninstalled, and Content Browser maintains the user settings of XDCAM Browser.
 
If you have already purchased and installed the optional "Advanced Pack" for your XDCAM Browser, you will need to re-register the serial number after the upgrade to Content Browser.
If you have already purchased and registered the optional "NXCAM Activation Pack" to playback NXCAM clips, you will need to re-register the serial number after upgrading to Content Browser.
 
You can install Content Management Utility and Content Browser on a single computer, and use the "Convert File Format" function to import clips managed in Content Management Utility to Content Browser.
 
The software package contains:
- Content Browser Ver 1.1
- a ReadME document
- Installation and Help guides in both French and English
 
Please read the Installation guide and ReadMe document before installing the software.

Windows version of the CVP file editor to configure gamma curves and LUT

Driver + Utility software for SRD1

OS required:

Windows 7 Professional/Ultimate Service Pack 1 (64bit) or later

Please see ReadmeFirst file in DL pkg. 

OS:

Microsoft Windows XP Service Pack 3 or later
 Microsoft Windows Vista 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows 7 32-bit/64-bit version, Service Pack 1 or later

Please review Read_Me file before installing.

OS:

Windows XP (32bit) Service Pack 3 or later, Windows XP (64bit) Service Pack 2 or later,  Windows Vista Service Pack 2 or later, Windows 7 Service Pack 1 or later

Please review Read_Me file before installing

The viewer software, SRV-10 for Windows, is a simple-to-use PC application that allows users to easily playback SStP (Simple Studio Profile), MPEG4 MXF files. It runs on Windows-based PCs, and supports Windows XP, Vista, and Win7.

Change since v1.1 release:
- Support for 422/1080/59P, 50P SStP MXF files is added.

Installation:
The supplied package contains the following three (3) files:

- SRViewer\setup.exe
- MXFShellExtension64\setup.exe
- ReadMe_Win(E).txt

Please review the ReadMe(E).txt file for installation instructions, program notes, and limitations.

Term of use:
The SRV-10 for Windows is free to use software in agreement with the attached EULA (END-USER LICENSE AGREEMENT).

This firmware enables additional features for HXR-NX70U sold in Canada

1.     Improvement of zoom rocker operation(Selectable zoom speed)

2.     Simultaneous Rec. with internal memory and memory card

3.     1920x1080/30p, 1280x720/60p for NTSC version, 1280x720/50p for PAL version

4.     Assignable keys

5.     Last Scene Review feature

6.     Face detection window can be turned off by “Display on/off” for line-out purpose

7.     “Zebra” and “Histogram” can be turned on by “Display on/off” for line out purpose.

The attached application will load the firmware upgrade version 2.00 on NEX-FS100L and NEXFS100K sold in Canada.

This new firmware will enable additional fonctionalities as described below:

1. Added 50Hz recording system (PAL): 1920x1080 50p, 50i, 25p and 1280x720 50p.
2. Camera Profile (camera settings can be saved to and loaded from a memory card).
3. Additional 4x and 8x Expanded Focus magnification: (with user selectable focus area). 
4. Selectable ISO or GAIN sensitivity display.
5. Selectable Focus indication in FEET or METERS (E-mount lens only). 
6. Selectable Shutter indication as EXPOSURE TIME or SHUTTER ANGLE.
7. Added the following Aspect-Ratio markers: 2.35:1, 1.85:1 and 1.66:1.
8. Display ON/OFF button enables Zebra and/or Histogram overlay onto video output.
9. Compatible with the new A-Mount to E-Mount adaptor, model LA-EA2. One push Auto-IRIS and continuous 15-point, Phase-Detection Auto-Focus operation with most Alpha A-Mount lenses is available. Lens metadata is displayed onscreen and stored real-time to image file.

This upgrade can be performed by the end-user, following the instruction on the application screen. If you have questions or concerns, please contact your local dealer.

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

OS:  Microsoft Windows XP Professional Service Pack 3 or later, Microsoft Windows Vista Business 32-bit/64-bit version, Service Pack 2 or later, Microsoft Windows Vista Ultimate 32-bit/64-bit version, Service Pack 2 or later, Microsoft Windows 7 Professional 32-bit/64-bit version, Service Pack 1 or later, Microsoft Windows 7 Ultimate 32-bit/64-bit version, Service Pack 1 or later

Note:VFAM is included in installation of Utility software. As well, new XDCAM drive firmware is included and the PDWU1/U2 drives should be updated using the Utility program.

This is the F65 Raw viewer application to view and apply basic correction to F65 footage. It also lest you convert to DPX and Open EXR.

It works on Windows 7 , 64 Bits only

This is the F65 Raw viewer application to view and apply basic correction to F65 raw footage. It also lets you convert to DPX and Open EXR.

This application will only work with Mac OS X Lion.

Support has been added for Sony SRMemory media. SR-Lite and SR-SQ bit rates for 4:2:2 files, and SR-SQ bit rates for 4:4:4 files, are supported through the SR Plug-in.

Supported Avid Products (Win):

• Avid Media Composer 6.0
• Avid Symphony 6.0

Support has been added for Sony SRMemory media. SR-Lite and SR-SQ bit rates for 4:2:2 files, and SR-SQ bit rates for 4:4:4 files, are supported through the SR Plug-in.

Supported Avid Products (Win):

• Avid Media Composer  5.5.3
• Avid Symphony  5.5.3

Supports XDCAM Optical and XDCAM EX formats on Win-64bit platform for:

• Avid Media Composer 6.0
• Avid Symphony 6.0

Supports XDCAM Optical and XDCAM EX formats on Win-32bit platform for:

• Avid Media Composer 5.5.3
• Avid NewsCutter 9.5.3
• Avid Symphony 5.5.3

Supported products (Windows):

• Avid Media Composer 5.5.1/5.5.2
• Avid NewsCutter  9.5.1/9.5.2
• Avid Symphony  5.5.1/5.5.2

Supports use of SxS cards formatted in UDF mode. (*.MXF files on SxS)

Requires SxS Device driver Ver. 1.1.0.0 for Win . Please download off site as required.

Please review enclosed ReadMe file before installing.

Minimum version of SxS driver required to support new SxS UDF driver.

Download pkg is for separate update of main SxS driver.

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

Version up tool for the PMW-EX3 Ver1.17 (for Win)
Major functions updated:
Timecode
Media handling

[System Requirements]
The supplied set of software has been tested and found to run under the following conditions.
 OS:
  Windows
 Microsoft Windows XP Professional Service Pack 3 or later
 Microsoft Windows Vista Business 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows Vista Ultimate 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows 7 Professional 32-bit/64-bit version
 Microsoft Windows 7 Ultimate 32-bit/64-bit version
   Processor:
  Windows
 Intel Core 2 Duo 2.66 GHz or higher, or Intel Xeon 2 GHz or higher
  Memory:
 2GB or more
 Hi-Speed USB (USB 2.0):
 High-Speed USB (USB 2.0) host controller is necessary to connect the computer to this unit.

Note:
These test results may not apply to all computers.

PDZ-VX10 Ver 2.30upd now supports:
 * XDCAM HD422 1920x1080 23.98
 * Win Vista 64bit
 * Win 7 32bit and 64bit
(Note - Shell extension does not work in 64bit

Software that enables a PC to playback proxy (low-res) MXF files.

(Win)

U1 Utility V2.30upd now supports:
 * V1.6 XDCAM HD422 equipment
 * Win 7 32bit and 64bit
 * Auto start of U1 Utility pgm when in formatted disc is inserted in drive

ProDisc Ver 2.30 now supports:
 * Win 7 32bit and 64bit
 * Discs recorded with Voice-over (Note - VO editing not supported in PDZ1)

PDZ1 Ver 2.70 now supports:
 * Live Logging of HD422
 * Win Vista 64bit
 * Win 7 32bit and 64bit
 * FAM Driver Ver2.30upd (incl)

Functionality added:
  * SxS-1 memory card can be used
  * Memory Stick PRO-HG Duo HX can be used (with optional MEAD-MS01 Media Adapter)
  * SDHC card can be used (with optional MEAD-MS01 Media Adapter)

Functionality added:
  * SxS-1 memory card can be used
  * Memory Stick PRO-HG Duo HX can be used (with optional MEAD-MS01 Media Adapter)
  * SDHC card can be used (with optional MEAD-MS01 Media Adapter)