System requirements

  The AXS-CR1 Utility Software has been tested under the following operating conditions.

- Operating system
�
 Mac OS X SnowLeopard 10.6.8 or later, 64-bit version
 Mac OS X Lion 10.7.4 or later, 64-bit version
 Mac OS X Mountain Lion 10.8

- Memory
� 4GB or more

- Free hard disk space
� 100MB or more

- USB
    Hi-Speed USB� (USB 2.0�)
 A Hi-Speed USB� (USB 2.0), host controller is required to connect to a AXS-CR1.
    SuperSpeed USB� (USB 3.0)
 A SuperSpeed USB� (USB 3.0), host controller is required to connect to a AXS-CR1.

Please review the ReadMe(E)_v1_10.txt file included in the zip packge before installing the Utility pgm.

Requirments:
 
OS:   Mac OS X 10.6.8 or later 32-bit/64-bit
 Mac OS X 10.7.4 or later 32-bit/64-bit
 Mac OS X 10.8
 
Processor: Intel Core 2 Duo 2.2 GHz or higher, or Intel Xeon 2.0 GHz or higher
 
Memory: 2GB or more (4GB when using TL-RE or QL-WO discs)
 
USB: Hi-Speed USB (USB 2.0):
   Hi-Speed USB (USB 2.0) host controller required.
        SuperSpeed USB (USB 3.0): (PDW-U2 only)
   SuperSpeed USB (USB 3.0) host controller required.
          Connection between Mac & PDW-U1 or PDW-U2 is supported only via built-in USB ports on Mac.
 
 New XDCAM drive firmware is included and the PDWU1/U2 drives should be updated using the Utility program.
Please see ReadMe file before installing.

Content Browser Version 1.1
 
Content Browser is a successor to XDCAM Browser. 
When you upgrade XDCAM Browser to Content Browser, XDCAM Browser is uninstalled, and Content Browser maintains the user settings of XDCAM Browser.
 
If you have already purchased and installed the optional "Advanced Pack" for your XDCAM Browser, you will need to re-register the serial number after the upgrade to Content Browser.
If you have already purchased and registered the optional "NXCAM Activation Pack" to playback NXCAM clips, you will need to re-register the serial number after upgrading to Content Browser.
 
You can install Content Management Utility and Content Browser on a single computer, and use the "Convert File Format" function to import clips managed in Content Management Utility to Content Browser.
 
The software package contains:
- Content Browser Ver 1.1
- a ReadME document
- Installation and Help guides in both French and English
 
Please read the Installation guide and ReadMe document before installing the software.

Driver + Utility software for SRD1

Macintosh OS required:

Mac OS X v10.6 (64bit)
Mac OS X v10.7 (64bit)

Please see ReadmeFirst file in DL pkg.

Sony MXF and HDCAM-SR QuickTime Components for Final Cut Pro

System requirements:

- Intel quad-core processor or better is recommended
 - Mac OS X 10.5.6 or later
 - QuickTime 7.6 or later
 - Final Cut Pro 7.0.3 or later

 - Final Cut Pro X

OS:

Mac OS X 10.5.8 or later
Mac OS X 10.6.7 or later
Mac OS X 10.7.1 or later

Please review Read_Me file before installing.

OS:  Mac OS X 10.6.8 or later 32-bit/64-bit, Mac OS X 10.7.3 or later 32-bit/64-bit

Note: VFAM is included in installation of Utility software. As well, new XDCAM drive firmware is included and the PDWU1/U2 drives should be updated using the Utility program.

The viewer software, SRV-10 for Windows, is a simple-to-use PC application that allows users to easily playback SStP (Simple Studio Profile), MPEG4 MXF files. It runs on Mac-based PCs, and supports Mac OS X 10.5.6 or higher.

Change since v1.0.1 release:
- Support for 422/1080/59P, 50P SStP MXF files is added
- Function of converting MXF files to MXF/DPX files is added

Installation:
The supplied package contains the following three (2) files:

- SR-Viewer-1_2_0.dmg
- ReadMe_Mac(E).txt  

Please review the ReadMe_Mac(E).txt file for installation instructions, program notes, and limitations.

Term of use:
The SRV-10 for Mac is free to use software in agreement with the attached EULA (END-USER LICENSE AGREEMENT)

Recommended OS:

• Mac OS X V10.5 (V10.5.0 or later)
• Mac OS X V10.6 (V10.6.0 or later)
• Mac OS X V10.7 (V10.7.0 or later)

This driver version supports Thunderbolt technology

(Note: This driver does not support Mac OS V10.4 (v10.4.9 or later)

This firmware enables additional features for HXR-NX70U sold in Canada

1.     Improvement of zoom rocker operation(Selectable zoom speed)

2.     Simultaneous Rec. with internal memory and memory card

3.     1920x1080/30p, 1280x720/60p for NTSC version, 1280x720/50p for PAL version

4.     Assignable keys

5.     Last Scene Review feature

6.     Face detection window can be turned off by “Display on/off” for line-out purpose

7.     “Zebra” and “Histogram” can be turned on by “Display on/off” for line out purpose.

The attached application will load the firmware upgrade version 2.00 on NEX-FS100L and NEXFS100K sold in Canada.

This new firmware will enable additional fonctionalities as described below:

1. Added 50Hz recording system (PAL): 1920x1080 50p, 50i, 25p and 1280x720 50p.
2. Camera Profile (camera settings can be saved to and loaded from a memory card).
3. Additional 4x and 8x Expanded Focus magnification: (with user selectable focus area). 
4. Selectable ISO or GAIN sensitivity display.
5. Selectable Focus indication in FEET or METERS (E-mount lens only). 
6. Selectable Shutter indication as EXPOSURE TIME or SHUTTER ANGLE.
7. Added the following Aspect-Ratio markers: 2.35:1, 1.85:1 and 1.66:1.
8. Display ON/OFF button enables Zebra and/or Histogram overlay onto video output.
9. Compatible with the new A-Mount to E-Mount adaptor, model LA-EA2. One push Auto-IRIS and continuous 15-point, Phase-Detection Auto-Focus operation with most Alpha A-Mount lenses is available. Lens metadata is displayed onscreen and stored real-time to image file.

This upgrade can be performed by the end-user, following the instruction on the application screen. If you have questions or concerns, please contact your local dealer.

NOTE: This plug-in supports import from SxS media only , and requires Apple FCP version 10.0.4 or later

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

Supported CPU:  Intel Core Duo 2.0GHz or greater, or Intel Xenon 2.0GHz or greater

Supported OS:  Mac OS X 10.5.8 or later, Mac OS X 10.6.2 or later (32bit), Mac OS X 10.6.2 or later(64bit), Mac OS X 10.7.0 or later(32bit), Mac OS X 10.7.0 or later(64bit)   (Caution: PDZK-P1 does not support Final Cut Pro X)

Support has been added for Sony SRMemory media. SR-Lite and SR-SQ bit rates for 4:2:2 files, and SR-SQ bit rates for 4:4:4 files, are supported through the SR Plug-in.

 Supported Avid Products (Mac):

• Avid Media Composer 6.0
• Avid Symphony 6.0

Support has been added for Sony SRMemory media. SR-Lite and SR-SQ bit rates for 4:2:2 files, and SR-SQ bit rates for 4:4:4 files, are supported through the SR Plug-in.

Supported Avid Products (Mac):

• Avid Media Composer  5.5.3
• Avid  Symphony  5.5.3

Supported products (Mac):

• Avid Media Composer 5.5.1/5.5.2
• Avid Symphony 5.5.1/5.5.2

Supports XDCAM Optical and XDCAM EX formats on Mac-64bit platform for:

• Avid Media Composer 6.0
• Avid Symphony 6.0

Supports XDCAM Optical and XDCAM EX formats on Mac-32bit platform for:

• Avid Media Composer 5.5.3
• Avid Symphony 5.5.3

Supports use of SxS cards formatted in UDF mode. (*.MXF files on SxS)

Requires SxS Device driver Ver. 1.0.52020 for Mac. Please download off site as required.

Please review enclosed ReadMe file before installing

Minimum version of SxS driver required to support new SxS UDF driver.

Download pkg is for separate update of main SxS driver.

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

Version up tool for the PMW-EX3 Ver1.17 (for Mac)
Major functions updated:
Timecode
Media handling

System requirements:
 Mac OS X 10.5.8 or later
 Mac OS X 10.6.4 or later
 Processor:
 Intel Core 2 Duo 2.2 GHz, or Intel Xeon 2 GHz or higher
 Memory:
 2GB or more
 Hi-Speed USB (USB 2.0):
 High-Speed USB (USB 2.0) host controller is necessary to connect the computer to this unit.

FAM driver for PowerPC based Tiger OS 10.4 -5x

To be used with XDCAM full function decks (Not PDWU1)

PDZK-P1 Ver 2.12 now supports:
 * Mac OS X 10.6
 * Mac FAM Driver Ver 2.3 (Mac OS X 10.6 32bit & 64bit)
 * XDCAM HD422 V1.6 firmware

Functionality added:
  * SxS-1 memory card can be used
  * Memory Stick PRO-HG Duo HX can be used (with optional MEAD-MS01 Media Adapter)
  * SDHC card can be used (with optional MEAD-MS01 Media Adapter)

Functionality added:
  * SxS-1 memory card can be used
  * Memory Stick PRO-HG Duo HX can be used (with optional MEAD-MS01 Media Adapter)
  * SDHC card can be used (with optional MEAD-MS01 Media Adapter)

PDZK-LT1 Version 1.20 adds the following items:
  -  DVCAM (DV-AVI) 25Mbps support
  -  Prefix characters for Clip name (46 chars)
Supported OS:
  Mac OS X 10.5.8 or later
  Mac OS X 10.6.3 or later (32bit)
  Mac OS X 10.6.3 or later (64bit)

NOTE - No support for Mac OS X 10.4 (Tiger) from this version onwards