Requirements:
 
OS:  Microsoft Windows XP Professional Service Pack 3 or later
 Microsoft Windows Vista Business 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows Vista Ultimate 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows 7 Professional 32-bit/64-bit version, Service Pack 1 or later
 Microsoft Windows 7 Ultimate 32-bit/64-bit version, Service Pack 1 or later
 Microsoft Windows 8 Pro 32-bit/64-bit version
 
Processor: Intel Core 2 Duo 3.0 GHz or higher, or Intel Xeon 3.0 GHz or higher
 
Memory: 2GB or more (4GB when using TL-RE or QL-WO discs)
 
USB: Hi-Speed USB (USB 2.0):
   Hi-Speed USB (USB 2.0) host controller required.
        SuperSpeed USB (USB 3.0): (PDW-U2 only)
   SuperSpeed USB (USB 3.0) host controller required.
         
New XDCAM drive firmware is included and the PDWU1/U2 drives should be updated using the Utility program.
Please see ReadMe file before installing.

Requirments:
 
OS:   Mac OS X 10.6.8 or later 32-bit/64-bit
 Mac OS X 10.7.4 or later 32-bit/64-bit
 Mac OS X 10.8
 
Processor: Intel Core 2 Duo 2.2 GHz or higher, or Intel Xeon 2.0 GHz or higher
 
Memory: 2GB or more (4GB when using TL-RE or QL-WO discs)
 
USB: Hi-Speed USB (USB 2.0):
   Hi-Speed USB (USB 2.0) host controller required.
        SuperSpeed USB (USB 3.0): (PDW-U2 only)
   SuperSpeed USB (USB 3.0) host controller required.
          Connection between Mac & PDW-U1 or PDW-U2 is supported only via built-in USB ports on Mac.
 
 New XDCAM drive firmware is included and the PDWU1/U2 drives should be updated using the Utility program.
Please see ReadMe file before installing.

Content Browser Version 1.1
 
Content Browser is a successor to XDCAM Browser. 
When you upgrade XDCAM Browser to Content Browser, XDCAM Browser is uninstalled, and Content Browser maintains the user settings of XDCAM Browser.
 
If you have already purchased and installed the optional "Advanced Pack" for your XDCAM Browser, you will need to re-register the serial number after the upgrade to Content Browser.
If you have already purchased and registered the optional "NXCAM Activation Pack" to playback NXCAM clips, you will need to re-register the serial number after upgrading to Content Browser.
 
You can install Content Management Utility and Content Browser on a single computer, and use the "Convert File Format" function to import clips managed in Content Management Utility to Content Browser.
 
The software package contains:
- Content Browser Ver 1.1
- a ReadME document
- Installation and Help guides in both French and English
 
Please read the Installation guide and ReadMe document before installing the software.

Content Browser Version 1.1
 
Content Browser is a successor to XDCAM Browser. 
When you upgrade XDCAM Browser to Content Browser, XDCAM Browser is uninstalled, and Content Browser maintains the user settings of XDCAM Browser.
 
If you have already purchased and installed the optional "Advanced Pack" for your XDCAM Browser, you will need to re-register the serial number after the upgrade to Content Browser.
If you have already purchased and registered the optional "NXCAM Activation Pack" to playback NXCAM clips, you will need to re-register the serial number after upgrading to Content Browser.
 
You can install Content Management Utility and Content Browser on a single computer, and use the "Convert File Format" function to import clips managed in Content Management Utility to Content Browser.
 
The software package contains:
- Content Browser Ver 1.1
- a ReadME document
- Installation and Help guides in both French and English
 
Please read the Installation guide and ReadMe document before installing the software.

Sony MXF and HDCAM-SR QuickTime Components for Final Cut Pro

System requirements:

- Intel quad-core processor or better is recommended
 - Mac OS X 10.5.6 or later
 - QuickTime 7.6 or later
 - Final Cut Pro 7.0.3 or later

 - Final Cut Pro X

The viewer software, SRV-10 for Windows, is a simple-to-use PC application that allows users to easily playback SStP (Simple Studio Profile), MPEG4 MXF files. It runs on Windows-based PCs, and supports Windows XP, Vista, and Win7.

Change since v1.1 release:
- Support for 422/1080/59P, 50P SStP MXF files is added.

Installation:
The supplied package contains the following three (3) files:

- SRViewer\setup.exe
- MXFShellExtension64\setup.exe
- ReadMe_Win(E).txt

Please review the ReadMe(E).txt file for installation instructions, program notes, and limitations.

Term of use:
The SRV-10 for Windows is free to use software in agreement with the attached EULA (END-USER LICENSE AGREEMENT).

The viewer software, SRV-10 for Windows, is a simple-to-use PC application that allows users to easily playback SStP (Simple Studio Profile), MPEG4 MXF files. It runs on Mac-based PCs, and supports Mac OS X 10.5.6 or higher.

Change since v1.0.1 release:
- Support for 422/1080/59P, 50P SStP MXF files is added
- Function of converting MXF files to MXF/DPX files is added

Installation:
The supplied package contains the following three (2) files:

- SR-Viewer-1_2_0.dmg
- ReadMe_Mac(E).txt  

Please review the ReadMe_Mac(E).txt file for installation instructions, program notes, and limitations.

Term of use:
The SRV-10 for Mac is free to use software in agreement with the attached EULA (END-USER LICENSE AGREEMENT)

NOTE: This plug-in supports import from SxS media only , and requires Apple FCP version 10.0.4 or later

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

Supported CPU:  Intel Core Duo 2.0GHz or greater, or Intel Xenon 2.0GHz or greater

Supported OS:  Mac OS X 10.5.8 or later, Mac OS X 10.6.2 or later (32bit), Mac OS X 10.6.2 or later(64bit), Mac OS X 10.7.0 or later(32bit), Mac OS X 10.7.0 or later(64bit)   (Caution: PDZK-P1 does not support Final Cut Pro X)

This is the F65 Raw viewer application to view and apply basic correction to F65 footage. It also lest you convert to DPX and Open EXR.

It works on Windows 7 , 64 Bits only

This is the F65 Raw viewer application to view and apply basic correction to F65 raw footage. It also lets you convert to DPX and Open EXR.

This application will only work with Mac OS X Lion.

Supports use of SxS cards formatted in UDF mode. (*.MXF files on SxS)

Requires SxS Device driver Ver. 1.1.0.0 for Win . Please download off site as required.

Please review enclosed ReadMe file before installing.

Supports use of SxS cards formatted in UDF mode. (*.MXF files on SxS)

Requires SxS Device driver Ver. 1.0.52020 for Mac. Please download off site as required.

Please review enclosed ReadMe file before installing

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

The XDCAM Browser download package contains:  XDCAM Browser Software, a ReadMe file, an Installation guide, and a Help guide. Please review the ReadMe file and Installation guide to ensure you have the correct XDCAM hardware versions and meet System requirements before use.

[System Requirements]
The supplied set of software has been tested and found to run under the following conditions.
 OS:
  Windows
 Microsoft Windows XP Professional Service Pack 3 or later
 Microsoft Windows Vista Business 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows Vista Ultimate 32-bit/64-bit version, Service Pack 2 or later
 Microsoft Windows 7 Professional 32-bit/64-bit version
 Microsoft Windows 7 Ultimate 32-bit/64-bit version
   Processor:
  Windows
 Intel Core 2 Duo 2.66 GHz or higher, or Intel Xeon 2 GHz or higher
  Memory:
 2GB or more
 Hi-Speed USB (USB 2.0):
 High-Speed USB (USB 2.0) host controller is necessary to connect the computer to this unit.

Note:
These test results may not apply to all computers.

Clip viewing, Browsing & File management software utility for XDCAM EX.

System requirements:
 Mac OS X 10.5.8 or later
 Mac OS X 10.6.4 or later
 Processor:
 Intel Core 2 Duo 2.2 GHz, or Intel Xeon 2 GHz or higher
 Memory:
 2GB or more
 Hi-Speed USB (USB 2.0):
 High-Speed USB (USB 2.0) host controller is necessary to connect the computer to this unit.

PDZ-VX10 Ver 2.30upd now supports:
 * XDCAM HD422 1920x1080 23.98
 * Win Vista 64bit
 * Win 7 32bit and 64bit
(Note - Shell extension does not work in 64bit

Software that enables a PC to playback proxy (low-res) MXF files.

(Win)

PDZK-P1 Ver 2.12 now supports:
 * Mac OS X 10.6
 * Mac FAM Driver Ver 2.3 (Mac OS X 10.6 32bit & 64bit)
 * XDCAM HD422 V1.6 firmware

PDZ1 Ver 2.70 now supports:
 * Live Logging of HD422
 * Win Vista 64bit
 * Win 7 32bit and 64bit
 * FAM Driver Ver2.30upd (incl)

PDZK-LT1 Version 1.20 adds the following items:
  -  DVCAM (DV-AVI) 25Mbps support
  -  Prefix characters for Clip name (46 chars)
Supported OS:
  Mac OS X 10.5.8 or later
  Mac OS X 10.6.3 or later (32bit)
  Mac OS X 10.6.3 or later (64bit)

NOTE - No support for Mac OS X 10.4 (Tiger) from this version onwards